
Fire door price in India by type and rating (2026)
| Fire door type | Typical rating | Price | Complete single-leaf door (leaf + frame) |
|---|---|---|---|
| Steel (GI) fire door | 60 – 120 min | ₹370 – ₹600 per sq ft | ₹15000 – ₹28000 |
| Wooden fire door; 60 min | 60 min | ₹500 – ₹1 200 per sq ft (higher for higher ratings) | ₹15000 – ₹35000 |
| Wooden fire door; 120 min | 120 min | ₹30000 – ₹70000 | |
| Steel double-leaf fire door | 90 – 120 min | ₹30000 – ₹35000+ | |
| Glazed fire door | 60 – 120 min | About ₹4 600 per sq ft for 120-min glass | On quote |
These are typical market prices for supply. Installation, fire-rated hardware upgrades, transport and taxes are often quoted separately.
How fire rating affects the price
A fire rating is how long the complete door assembly holds back fire and smoke in a standard test: 30, 60, 90 or 120 minutes, and up to 240 minutes for special industrial doors. Higher ratings need thicker cores, more insulation and stronger frames, so a 120-minute door costs about twice as much as a 60-minute one.
| Rating | Where it is commonly used |
|---|---|
| 30 minutes | Internal corridors and smoke-stop doors |
| 60 minutes | Corridors; lift lobbies and protected staircases |
| 90 minutes | Openings in fire compartment walls |
| 120 minutes | Staircases in high-rise buildings; basements and parking; refuge areas; electrical and service shafts |
The rating your building needs comes from its approved fire safety plan under the National Building Code (NBC) and local fire rules. Never choose a lower rating to save money; the door won't pass the fire NOC inspection.
Fire door price by size
Larger doors use more material, so they cost more. Double-leaf doors cost the most because they need two leaves, extra hardware and a coordinator so both leaves close in the right order.
| Configuration | Size (W × H) | Typical use |
|---|---|---|
| Single leaf; standard | 900 × 2100 mm (3 ft × 7 ft) | Office entries; server rooms; electrical rooms; stairwells |
| Single leaf; wide | 1000 × 2100 mm (3 ft 4 in × 7 ft) | Escape routes; busy corridors; hospital rooms |
| Single leaf; tall | 1000 × 2400 mm (3 ft 4 in × 8 ft) | High-ceiling offices and lobbies |
| Double leaf; unequal | 1200 × 2100 mm (4 ft × 7 ft) | Service passages; the small leaf opens only for equipment |
| Double leaf; equal | 1800 × 2100 mm (6 ft × 7 ft) | Main fire exits; malls; factories |
Most 30- and 60-minute doors are about 45 to 46 mm thick. 120-minute and higher doors are often 50 to 60 mm thick to hold more insulation.
Fire door price by material
Steel fire doors
Steel fire doors use galvanised iron (GI) or mild steel sheets with a mineral wool or similar insulated core. They are the most common choice for staircases, shafts, basements and commercial buildings, and cost about ₹370 to ₹600 per sq ft. Thicker steel and more insulation raise the price.
Wooden fire doors
Wooden fire doors use a solid timber or particleboard core with fire-retardant layers, finished in laminate or veneer. They look like ordinary doors, so they suit apartment entrances, hotels and offices. They cost about ₹500 to ₹1,200 per sq ft, depending on the rating and finish.
Glazed fire doors
Glazed fire doors use special fire-rated glass in a reinforced frame. Fire-rated glass costs far more than normal glass, so these are the most expensive: around ₹4,600 per sq ft for 120-minute glass. Small vision panels in steel or wooden doors cost much less than fully glazed doors.
Fire door frame and hardware costs
The frame and hardware must carry the same fire rating as the door, because the assembly is tested as one unit. Frames are usually heavy-gauge GI steel. Hardware includes fire-rated hinges, a door closer, a lock or latch, panic bars on escape routes and intumescent seals, which swell in heat to close the gaps around the door.
Ordinary hinges, locks and closers fail early in a fire. Fire-rated hardware can make up a large share of the total price, so check exactly which items each quote includes.
Fire door installation cost
Installation usually adds about 10 to 25% to the supply price for heavy doors. A fire door takes longer to fit than an ordinary door: the frame must be fixed and grouted into the wall, the gaps around the leaf kept tight, and the closer and latch checked so the door shuts and locks on its own.
A panic bar, vision panel, special finish or taxes would add to this.
What certification should a fire door have?
In India, fire doors are specified to IS 3614:2021, the BIS standard for fire doors and doorsets, and to the fire rating required by the NBC. Ask the supplier for:
- The BIS licence or test certificate for the exact door configuration you are buying
- A fire test report from a recognised lab, showing the rating achieved
- A label on the door and frame showing the rating and manufacturer
Imported doors may carry UL (USA) or CE (Europe) marks; check with your fire consultant whether they are accepted for your project. For how ratings are tested, see our guide to fire ratings.
How to compare fire door quotes
- Match the spec: same fire rating, material, thickness, size and frame in every quote.
- Check the test report: it must cover the exact door, frame and hardware being quoted.
- Check the hardware list: hinges, lock, closer, panic bar, intumescent and smoke seals, vision panel.
- Check the scope: frame, installation, transport, unloading and fixing materials.Check the terms: taxes, warranty, delivery time and payment stages.
Common mistakes when buying fire doors
- Comparing quotes with different specs: a 60-minute wooden door and a 120-minute steel door will never cost the same.
- Not checking what's included: some quotes cover the leaf only.
- Swapping in cheaper hardware: non-rated hinges or closers can void the door's rating.
- Choosing a lower rating to save money: the building can fail its fire inspection.
- Accepting a rating without a test report: a label or a sales claim is not proof.


