Skip to main content
IndiFrame
Back to Blogs
Windows & Doors

WPC Door Price in India Per Sq Ft: Cost & Buying Guide (2026)

WPC doors cost ₹130 to ₹500 per sq ft in India in 2026, and most fall between ₹200 and ₹300. A standard 7 ft × 3 ft WPC door shutter costs about ₹2,700 to ₹6,300. With a WPC frame and fitting, a complete door costs about ₹5,000 to ₹12,000, plus hardware and GST. The price depends on the door's thickness, density, finish and size, and on whether the quote includes the frame, hardware and installation. This guide shows typical prices for each, works out the cost of a full door, and lists what to check before you compare quotes.

Reuben FernandesReuben Fernandes
November 13, 202610 min read

Share
Get expert help

Get expert help.

Talk to us.

Book free consultation
WPC door price per sq ft in India 2026

What is a WPC door?


A WPC door is made from wood plastic composite, a board of wood fibre or powder bonded with PVC. It looks and works like a wooden door but is waterproof, termite-proof and doesn't swell or rot. That is why WPC doors are popular for bathrooms, kitchens and utility areas in Indian homes.

WPC door price per sq ft in India (2026)

The table shows typical market prices for the door shutter (the door leaf) only. A standard 7 ft × 3 ft door is 21 sq ft.

GradeTypical specPrice per sq ftStandard door (21 sq ft)
Budget25 mm; plain or basic foil; lower density₹130 – ₹200₹2700 – ₹4200
Standard28–30 mm; laminate or PVC foil finish₹200 – ₹300₹4200 – ₹6300
Premium32–35 mm+; high density; PU; HPL or designer finish₹300 – ₹500₹6300 – ₹10500

Prices vary by city and supplier. Most quotes exclude GST, the frame, hardware and fitting unless they say otherwise.

WPC door price by size

Most WPC door shutters cost ₹200 to ₹300 per sq ft. This is what that means for common door sizes:

DoorSizeAreaShutter price (₹200–₹300 per sq ft)
Bathroom door6.5 ft × 2.5 ft16.25 sq ft₹3250 – ₹4875
Bathroom door7 ft × 2.5 ft17.5 sq ft₹3500 – ₹5250
Bedroom door7 ft × 3 ft21 sq ft₹4200 – ₹6300
Main or wide door7 ft × 3.5 ft24.5 sq ft₹4900 – ₹7350

WPC door frame price

A ready-made WPC door frame (chowkat) set costs about ₹1,500 to ₹3,500 for a standard door. Heavier frame profiles cost ₹200 to ₹450 per running foot. A 7 ft × 3 ft door needs about 17 running feet of frame: two sides of 7 ft and a 3 ft top.
WPC frames are a good match for WPC doors in bathrooms and kitchens, because wooden frames swell and rot where they meet a wet floor.

How much does a complete WPC door cost?

Here is a typical bedroom or bathroom door at mid-range prices:

ItemWorkingCost
WPC shutter; 30 mm; laminate finish21 sq ft × ₹250₹5250
WPC frame setReady-made set₹2500
Fitting labourPer door₹1200
Total₹8950

Hinges, lock, handle, door stopper and GST are extra unless the quote includes them. For a whole home, multiply by the number of doors: a 2BHK usually has 4 to 6 internal doors.

What affects the price of a WPC door?

Thickness and size

WPC doors usually come in 25 mm, 30 mm and 35 mm thicknesses. A thicker door uses more material per sq ft, so it costs more but feels more solid and blocks more sound. Taller or wider custom sizes also cost more than the standard 7 ft × 3 ft.

Density and core

Density is how much material is packed into the board, measured in kg/m³. Budget WPC is about 550 to 650 kg/m³, and premium WPC is 800 kg/m³ or more. Higher density means better strength, better sound blocking and screws that hold firmly. Some cheaper doors use a hollow extruded core to save weight and cost.

Finish and design

A plain, unfinished WPC door is the cheapest. A factory-applied PVC foil or laminate adds a little to the price. CNC grooves, moulded panels and high-pressure laminate (HPL) cost more, and PU or duco paint, glass inserts and natural wood veneer are the most expensive finishes.

Frame and hardware

A hollow or semi-solid WPC frame costs less than a solid one. Basic iron or aluminium hinges and handles are the cheapest; stainless steel costs more, solid brass more again, and digital or smart locks cost the most.

Installation

Fitting labour usually costs ₹800 to ₹2,000 per door, and fitting a ready-made frame adds ₹500 to ₹1,500. WPC can't be planed down like wood, so the wall opening must be square and plastered before fitting. Brands that measure and install their own doors include this in the price.

WPC door vs flush, wooden and uPVC doors: price comparison

Door typePrice per sq ftWater resistance
Flush door (plywood)₹100 – ₹250Low: swells if wet
WPC door₹130 – ₹500High: waterproof and termite-proof
uPVC door₹400 – ₹700High
Solid wood doorFrom ₹800Low to medium

WPC doors cost a little more than flush doors but don't swell, rot or attract termites, which makes them the better value for bathrooms, kitchens and utility areas. For other options, see our ABS door price guide and flush door price guide.

How to compare WPC door quotes

  • Scope: check whether the quote is for the shutter only or includes the frame (chowkat), architraves, hardware, delivery and installation.
  • Thickness and density: compare the same thickness, and ask for the weight of one door. A much lighter door of the same size uses lower-density material.
  • Core: ask whether the door is solid or hollow, and whether the hinge and lock areas are reinforced.
  • Finish: compare like for like: raw, foil, laminate, PU or HPL.
  • Pricing unit: make sure every quote uses the same unit: per sq ft, per running foot or per door.
  • Warranty and invoice: get the warranty in writing and a proper GST invoice. Without an invoice, you can't claim the warranty.

Common mistakes when buying WPC doors

  • Ignoring density: low-density doors dent easily, block less sound and don't hold screws well.
  • Buying on price alone: the cheapest doors are often hollow or poorly sealed and can sag or warp within a few years.
  • Assuming all WPC is waterproof: low-grade boards may not be sealed for wet areas. For bathrooms and exteriors, check that the door is rated waterproof and UV-resistant.
  • Forgetting the frame: a WPC door in a wooden frame can still fail when the frame rots. Use a WPC frame in wet areas.

Is GST included in WPC door prices?

Usually not. Most WPC door quotes show GST separately, so check whether the price says "inclusive of GST" before you compare suppliers.

IndiFrame WPC doors

IndiFrame WPC doors start at ₹300 per sq ft, including measurement and installation. Every door is made to the size of your opening and fitted by our own team, so you don't have to coordinate a supplier, a carpenter and a hardware shop. Read the best door material for bathrooms to see where WPC fits best in your home.

FAQs

Weekly Newsletter

Get insights straight to your mailbox

You May Also Like

Cover image for Fire Door Price in India: Rate by Fire Rating, Size & Material (2026)
Windows & Doors10 min read

Fire Door Price in India: Rate by Fire Rating, Size & Material (2026)

A standard single-leaf fire door in India costs about ₹15,000 to ₹35,000 in 2026, including the frame. Steel fire door leaves cost about ₹370 to ₹600 per sq ft (₹4,000 to ₹6,500 per sq m), and wooden fire doors ₹500 to ₹1,200 per sq ft. A 120-minute door costs roughly twice as much as a 60-minute door of the same type, and double-leaf and glazed fire doors cost more. The price depends on the fire rating, material, size, frame, hardware and installation. Unlike an ordinary door, a fire door is tested as a complete assembly: leaf, frame, seals and hardware together. This guide shows typical prices, what changes them, and what to check before you order.

Reuben Fernandes
November 13, 2026
Cover image for System Aluminium Windows Price Per Sq Ft in India: Cost Guide (2026)
Windows & Doors10 min read

System Aluminium Windows Price Per Sq Ft in India: Cost Guide (2026)

System aluminium windows cost about ₹1,150 to ₹3,000 per sq ft in India in 2026. Entry-level system sliding windows start at around ₹1,150 to ₹1,600, double-glazed systems cost ₹1,600 to ₹2,100, and slim, thermally broken or imported-hardware systems cost ₹2,100 to ₹3,000 or more. Regular (non-system) aluminium windows are cheaper, at about ₹350 to ₹950 per sq ft. The final price depends on the profile system, glass, window type, hardware, finish and installation. This guide shows typical prices for each, works out the cost of a real window, and explains what to check when you compare quotes.

Reuben Fernandes
November 13, 2026
Cover image for uPVC Window Price per Sq Ft in India (2026): Costs by Type, Glass and Installation
Windows & Doors10 min read

uPVC Window Price per Sq Ft in India (2026): Costs by Type, Glass and Installation

uPVC windows cost ₹450 to ₹1,500 per sq ft in India in 2026, including installation. Basic sliding and fixed windows start at ₹450 to ₹700, casement windows cost ₹600 to ₹1,000, and tilt and turn or double-glazed windows cost ₹900 to ₹1,500. GST is extra unless the quote says "inclusive". The price per sq ft changes with four things: the window type, the glass, the hardware and the finish. This guide shows what each one costs, how to work out the price of your own windows, and what to check in a quote.

Balavasudeva
November 13, 2026
Say hi on WhatsApp